- A fully programmable and automated system
- Capacity of 3 meter of core per scan
- Ability to auto-skip sections of core
- Auto logging of results to ASCII file
- Two probe sizes for different lithologies
- Steady State measuring method
- User defined stabilisation criteria
- Low learning threshold - easy to use
- Resolution of the probe position is 1.0 mm
- Depth is automatically registered for each measured data point
The Miniperm 300 is a slim design, high capacity Probe Permeameter
for measuring the gas permeability profile of slabbed cores.
The Miniperm 300 has a user-friendly design, with emphasis on accuracy
and efficiency during the data capture process. All
operations are controlled by computer, with the equipment
automatically capturing up to 3 meters of core in one scan. Key wellheader
parameters such as Company, Field, Well name, etc can be
entered, as well as the top depth for each core being
measured.
The sampling frequency of the probe can be set at as low as 1mm intervals,
allowing a very detailed permeability profile curve to be established
through the zones of interest. Intervals with core
missing, or intervals with core of too poor a quality to be measured, can
be automatically skipped by entering the depths of the
intervals to be left out.
Each measured depth point is automatically generated and stored,
together with the measured values for flow, pressure and the
calculated permeability.
Data output is versatile and can be easily integrated with other core analysis
data. The output is also compatible with the ResLab Corimag digital
core images & software.
|
